Thyristor Chip

The thyristor chip manufactured by RUNAU Electronics was originally introduced by GE processing standard and technology which compliant of USA application standard and qualified by worldwide clients. It’s featured in strong thermal fatigue resistance characteristics, long service life, high voltage, large current, strong environmental adaptability, etc. In 2010, RUNAU Electronics developed new pattern of thyristor chip which combined the traditional advantage of GE and European technology, the performance and efficiency were optimized greatly.

Parameter:

Technical specification:

RUNAU Electronics provides power semiconductor chips of phase controlled thyristor and fast switch thyristor.

1. Low on-state voltage drop

2. The thickness of aluminum layer is more than 10 microns

3. Double layer protection mesa

Tips:

1. In order to remain the better performance, the chip shall be stored in nitrogen or vacuum condition to prevent the voltage change caused by oxidation and humidity of molybdenum pieces

2. Always keep the chip surface clean, please wear gloves and do not touch the chip with bare hands

3. Operate carefully in the process of use. Do not damage the resin edge surface of the chip and the aluminum layer in the pole area of the gate and cathode

4. In test or encapsulation, please note that the parallelism, flatness and clamp force the fixture must be coincide with the specified standards. Poor parallelism will result in uneven pressure and chip damage by force. If excess clamp force imposed, the chip will be damaged easily. If imposed clamp force is too small, the poor contact and heat dissipation will affect the application.

5. The pressure block in contact with the cathode surface of the chip must be annealed

 Recommend Clamp Force